The structural parameters and performance parameters of the clamshell machine are optimized and matched by computer aided design, and the strength calculation and life prediction of the parts are carried out. At the same time, the related aspects of the product are simulated. Therefore, the commercial compost machines are more structured produced by FFM factory.
(1) Parts standardization, parts universalization and product serialization are implemented in the design to simplify production, improve efficiency, ensure product quality, reduce production costs, reduce parts types and facilitate maintenance.
(2) Use 3d design software to model the turning plane, focusing on the structural design and layout of the throwing knife. By analyzing the stress state in the working process, combining with the motion process of the tool parts and the strength analysis in the region, the theoretical model of parameters was established to optimize the working parameters.
(3) The spindle of the gear motor is directly connected to the drive shaft, and the whole machine is driven by the left and right driving wheel motor and the reducer respectively, controlled by the same frequency converter, to ensure the parallel walking of the machine, avoid two single reduction motor in the large span of the drive shaft and the drive shaft dislocation, so that the power transmission efficiency is high, vibration reduction, smooth operation. Using the commercial type of composting machine can automatically identify the slot end position to dock or return, remote control wireless remote control operation.
(4) Under the premise of ensuring reliability, the quality of the whole machine is reduced to the minimum, the lightweight design of the whole machine is realized, and the power quality ratio is improved to make the operation more economical. In view of the harsh working environment, the steel has been treated with anti-corrosion for many times to enhance the anti-corrosion performance and durability of the equipment.
(5) The working resistance sensor technology is adopted, and the pressure sensor is set up on the walking device. Pressure sensors are installed on each walking wheel of the commercial composting making equipment. When the pressure sensor signal of the walking wheel changes, the driving wheel of the walking wheel slows down or even stops rotating until the signal is normal and the walking wheel continues to move. The setting can control walking speed, reasonable use of power, improve work efficiency.
If you have any interest of our commercial composting machine, you can click the following link.
https://www.fertilizerfactorymachine.com/commercial-compost-facility/