Windrow Composting craft is a process in which organic matter is continuously degraded and stabilized through the action of microorganisms under certain conditions, and a product suitable for land use is produced. During the composting process, each organic matter is under the biological action to reach a state that is difficult to decompose, stable, and easily absorbed by crops.
Inoculum. Adding microbial agents (microbial agents) to livestock manure can speed up the fermentation rate of compost. Adding a well-decomposed stable fertilizer or compost with a maturity of 10%-20% of the raw materials can speed up the fermentation speed. In the process of male fertilization, the biological community is formed in a natural way and participates in the fermentation of organic waste and the decomposition of humus compounds.
Size of the Windrow. As microorganisms move on the surface of organic particles, reducing particle size and increasing surface area will promote the activity of microorganisms and speed up composting. On the other hand, if the raw materials of organic fertilizer manufacturers are too thin, it will hinder air. The flow in the pile layer reduces the available oxygen stars in the pile layer, thereby slowing down the activity of microorganisms. Therefore, in order to speed up the fermentation process, it is necessary to minimize the particle size of the compost raw materials while ensuring air permeability.
PH Value. The pH value is also one of the important factors affecting the growth of microorganisms. Generally speaking, the most suitable pH value for microorganisms is neutral or weakly alkaline. The pH that is too high or too low can make composting difficult. In addition, the pH value also affects the loss of nitrogen, so when the pH value is higher than 7.0, nitrogen volatilizes in the form of ammonia. But under normal circumstances, the pH value of livestock manure can meet the requirements of fermentation.
Ventilation and Oxygen Supply. Ventilation and oxygen supply is one of the key factors for the success of composting. Composting oxygen star is related to the content of organic matter in the compost material. The more organic links in the compost material, the greater the oxygen consumption. The proper oxygen concentration of the raw materials of chicken manure organic fertilizer manufacturers during the composting process is 18%. When the oxygen concentration is less than 18%, the life activities of microorganisms in a good composting process are restricted, and it is easy to cause the compost to enter an anaerobic state and produce odor.
Whether the materials in the production of organic fertilizer cause corrosion to the windrow compost turner-type turner is a concern for many customers. If the material causes corrosion to the windrow type of turning machine, it will shorten the service life of the turner and thrower equipment and increase the production of organic fertilizer. Cost is an uneconomical investment for enterprises.
As a professional fertilizer machine manufacturer, we will tell you clearly that the production of organic fertilizer will not cause corrosion to the hopper polishing machine. If it is not used for a long time, the equipment needs to be thoroughly cleaned, otherwise it will cause the machine to rust. This is because if the windrow composting equipment is not used for a long time, the residual materials in the machine and the water molecules in the air will combine to form a large amount of moisture, which will cause the contact part to rust after being in contact with the windrow composting equipment for a long time.
If customers have requirements of windrow compost turner materials, we can also customize them according to your needs. However, if stainless steel is used to make stacking type dumpers, the cost is much more expensive than ordinary ones. The operation method of using fertilizer starter to ferment sawdust and wood chips into organic fertilizer is as follows: regulate moisture, build a pile for fermentation, and overturn by fermentation. After the first turning of the pile, the temperature reached a high temperature above 56OC again, and the second turning of the pile was carried out. During the process of smashing the pile, a part of the dry material was found, and water should be sprayed on it until a suitable water star was reached. The third and fourth turns are the same as the second turn. After that, it enters the stage of large-chip fermentation, and the temperature is between 45℃ and 50℃. At this stage, the fermentation pile can be turned over 1-2 times as needed until the end of the fermentation process.
When you want to know more information, you can visit the following website. https://www.fertilizerfactorymachine.com/windrow-turner-for-sale/
If you want to consult something about our windrow composting mahcine, you can connect us by the contact information below.
E-mail: info@fertilizerfactorymachine.com
TEL: +86 180 3757 2883